Catalog
Contact
GN150
Features
- 1.The indexing head and the table are driven with a servo-motor.
- Easy to change the number of flutes (change gears are used on the former model.
- Table travel and traveling speed can be changed (Cannot be changed on the former model).
- 2.The hob arbor is provided with a tail stock center for the support to increase the holding rigidity of the hob arbor, thereby shortening the cycle time to one-sixth of the former model.
- 3.Borazon grinding wheel (standard equipment)
- Diamond grinding wheels are available for carbide hobs (optional).
| Maximum workpiece diameter (mm) |
φ80 |
|---|---|
| Maximum grinding length (mm) |
100 |
| No. of flutes: | 2～20 As required |
| Grinding wheel diameter (mm) |
φ125 |
| Grinding wheel speed （min-1） |
4,500 |
| Power consumption (KVA) |
2.1 |
| Floor area x height （mm） |
1050x1080x1600 |
| Machine weight (kgf) |
730 |